Cyclades AlterPath BladeManager Manual de instrucciones descargar pdf (Pagina 95)

Chapter 5: Using the Web Manager 81

CAUTION: For SSH tunneling between the SP manager and a target device to work, the SP manager’s

authentication method must match the authentication method assigned to the target device.

If the Configure target device templates button is clicked, a MindTerm session starts on the SP

manager console, and it brings up the sptemplate utility. See To use the sptemplate utility to create

a new template: on page 178. The new template is added to lists of command templates and

becomes available for using when configuring target devices.

Configuring Users and Groups

By selecting the Config - Users and groups menu option, the administrative user can configure

regular users and groups and authorize users and groups to access devices through the SP manager.

An administrative user may also choose to configure users as administrative users by adding them

to the admin group. Table 4.2 on page 25 shows the values to enter when configuring users.

Clicking the Delete button deletes the user or group without bringing up a confirmation dialog box.

Clicking the Add or Edit buttons for an existing user or group brings up a dialog for configuring

users or groups. Clicking the Device Access button next to a user or group name brings up the Edit

<user_or_groupname>’s dialog that shows any devices already assigned to the user or group; it also

causes an Add new device button to appear, which brings up another dialog with the fields and

menu options for configuring the access to a device. If no configured devices are available to be

assigned, the Add new device button does not appear.

To create and authorize a user for target device management:

1. Select the Config

- Users and groups menu option.

2. To add a user, perform the following steps:

a. Click the Add new user button.

b. Enter a username in the User Name field.

c. Enter an identifying name and optional job description in the Full Name field.

d. Select one of the radio buttons to choose a User Type:

e. Enter a password in the Password field and re

-enter it in the Retype password field.

f. Select an option from the PPP/PPTP access pull

-down menu: If you select any option

except None from the PPP/PPTP access pull

-down menu, enter a password in the

PPP⁄PPTP password field and re

-enter it in the Retype password field.

3. Assign target device access to a user by performing the following steps.

a. Click the Target device Access button.

b. Click the Add new device button. The Adding access to a new device for username

screen appears.

c. Select the target device from the New device pull

-down menu.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 239 240

Sin comentarios

Cyclades AlterPath BladeManager Manual de instrucciones Pagina 95