Cyclades AlterPath BladeManager Manual de instrucciones descargar pdf (Pagina 93)

Chapter 5: Using the Web Manager 79

The software opens the index.html file, which contains links to the help files for the installer

and administrator and the user.

6. Click Save and apply changes.

Configuring Target Devices

By selecting the Config - Target Devices menu option, the administrative user can configure target

devices connected to the SP manager and configure data buffering. Target devices are defined

using the values described in Table 4.15 on page 47.

The Data Buffering Default menu sets a default for data buffering for all devices, either Yes or No.

When configuring individual devices, the administrative user can then select either Default, Yes or

No to configure data buffering for the specific device. Selecting Default on this screen means that

the data buffering value set on this page is used when the administrative user configures new

target devices.

CAUTION: All devices connected to the private Ethernet ports of the SP manager must have a previously

configured private subnet name assigned. If not, the device would only be accessible if connected to the public

network, a highly unlikely scenario which is strongly discouraged.

The Web Manager displays target devices in the order in which they are configured. An

administrator can configure target device lists to appear in alphabetical order using the cli utility.

See Changing the Sort Order of Device Listings on page 132.

To configure data buffering for all target devices:

1. Select the Config

- Target Devices menu option.

2. Select Yes or No from the Data buffering Default pull

-down menu.

3. Click OK.

4. Click Save and apply changes.

Adding a target device

Make sure the following are complete.

• A private subnet has been created.

• An administrator has followed the procedure under To find out if an existing command

template works with a new target device: on page 178 to find out if a default command

template works with the new device. If a new template is needed, either the sptemplate utility

can be used directly by an administrator as described under To use the sptemplate utility to

create a new template: on page 178, or an administrative user can use the Web Manager

configuration screen as described in Configuring Target Device Types on page 80.

• You know the username and password pair that are used for logging into the SP or other type

of target device.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 239 240

Sin comentarios

Cyclades AlterPath BladeManager Manual de instrucciones Pagina 93