Cyclades AlterPath BladeManager Manual de instrucciones descargar pdf (Pagina 190)

176 MergePoint 5224/5240 Service Processor Manager Installer and Administrator Guide

After the administrator selects a template and a target device to test, a list of commands to test

displays like the one shown in the following screen example.

Not all listed commands are supported on every type of target device. If you select an unsupported

command, an error message displays that lists the supported commands.

The first time you select any action to test, you are prompted to enter a username and password. If

local authentication is specified for the target device, enter the username and password that you

entered to access the SP manager. If another authentication method is specified for the target

device, use the appropriate username and password for the specified authentication method. The

test command uses the same authentication and authorization processes that the SP manager uses in

its normal operation, as explained in MergePoint 5224/5240 SP Manager Authentication Options

on page 22 and User and Group Configuration on page 25.

See the following examples:

• The MergePoint 5224/5240 SP manager uses local authentication, and the administrator logs

into the SP manager using the spmanager username and password pair: root/root_password.

• The administrator tests the rsa.default command template on a server called

rack1_ibm_e306_rsa, which is configured for RADIUS authentication with username scottb

and password cycl123. The administrator must enter scottb and cycl123 to perform the test.

• The administrator tests the rsa.default command template on a server called

rack2_ibm_e306_rsa, which is configured for LDAP authentication with username sburns and

password 123cycl. The administrator must enter sburns and 123cyclto perform the test.

• The administrator tests the rsa.default command template on a server called

rack3_ibm_e306_rsa, which is configured for local authentication. The administrator must

Select a test to perform:

-Login and Native Command Interface

Console Access

Power On

Power Status

Power Cycle

Reset

Power Off

System Event Log

Clear Event Log

Retrieve Sensors

Test All

Exit

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 239 240

Sin comentarios

Cyclades AlterPath BladeManager Manual de instrucciones Pagina 190