Cyclades AlterPath OnBoard Información técnica descargar pdf (Pagina 458)

100

101

Options for the create_cf Command

418 AlterPath OnBoard Administrator’s Guide

Examples for create_cf Command Usage

All the examples assume you have done a network boot and you want to save

the image from RAM.

Saving an Image to a Flash PCMCIA Card

After inserting a flash memory PCMCIA card into PCMCIA slot 1, you would

enter the following command to save a copy of the image from RAM into the

flash memory PCMCIA card in PCMCIA slot 1.

Saving an Image into the Image2 area and Restoring the

Factory Default Configuration.

The following command saves the image from RAM into the image2 area and

restores the factory default configuration.

--dontformat Does not format the compact flash. The sizes of partitions

hda1-3 and 5-8 are checked. If the partition sizes are not

smaller than 2, 2, 5, 51, 51, 6, and 6 Mbytes respectively, the

image is installed in the specified image area.

--imageN Creates/replaces imageN, when n=1 | 2. Use this option to

replace only the specified image without erasing both images.

Changes the currentimage environment variable to boot

from the image.

[root@OnBoard /]# create_cf -d --/dev/hdc --image1

[root@OnBoard /]# create_cf --factory_default --image2

Table B-1: Options for the create_cf command (Continued)

Option Description

1 2 ... 453 454 455 456 457 458 459 460 461 462 463 ... 501 502

Comentarios a estos manuales

Sin comentarios

Cyclades AlterPath OnBoard Información técnica Pagina 458

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cyclades AlterPath OnBoard